Grizzly G0854 Owner's Manual page 8

Front
Rear
T
Figure 3. Guillotine and glue system controls & components.
guillotine
Pneumatic Edgebanding
Guillotine
P. Edgebanding Coil Guillotine: Severs trail-
ing end of edgebanding from roll.
Q. Edgebanding Coil Limit Switch: Activates
edgebanding coil guillotine.
— When leading edge of workpiece triggers
switch, end trimmer guillotine activates
and moves into cut position.
— When trailing end of workpiece passes
over and releases switch, edgebanding
coil guillotine activates and blade severs
edgebanding from roll.
-6-
P
Coil
R
U
Glue System
R. Glue Flow Adjustment Knob: Rotate coun-
terclockwise to increase glue flow; rotate
clockwise to decrease glue flow.
S. Glue Spindle: Applies melted glue to
workpiece edge.
T. Glue Spindle Adjustment Knob: Rotate
counterclockwise to move spindle closer to
workpiece; rotate clockwise to move glue
spindle farther away.
U. Glue Pot w/Lid: Stores and heats glue for
bonding edgebanding to workpiece. Remove
lid to inspect glue pot or to add glue. Leave
closed during operations.
S Q
Model G0854 (Mfd. Since 08/18)
glue system