Inventory - Grizzly G0854 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Loose Item Inventory (Figure 11)
A. Coil Support Mounting Arm ........................ 1
B. Panel Feeder Elevation Handwheel ........... 1
C. Glue Pot Lid ................................................ 1
D. Grease Gun ................................................ 1
Shipping Box Contents (Figure 12)
E. Coil Support Assembly ............................... 1
F. Hardware Bag ............................................ 1
Hardware Bag Contents (Figure 13)
G. Adjustable Guide Roller Assemblies .......... 4
—Threaded Roller Shafts
M8-1.25 x 12 x 52L ................................. 4
—Bushings ................................................. 4
—Flat Washers 8mm ................................. 4
—Roller Slide Nuts M8-1.25 ....................... 4
H. Coil Support Stud Assembly ...................... 1
—Stud-FT M10-1.5 x 150 ........................... 1
—Lock Nut M10-1.5 .................................... 1
—Hex Nuts M10-1.5 ................................... 2
—Fender Washers 10mm .......................... 3
Model G0854 (Mfd. Since 08/18)
A
B
D
Figure 11. Loose item inventory.
E
Qty
Qty
Figure 12. Shipping box contents.
Qty
G
H
Figure 13. Hardware bag contents.
C
F
-21-