System Recovery; Drive Failure Recovery; Overtemperature Shutdown Recovery (All Models) - GE PACSystems ICRXIDIXNE19LCTA User Manual

6 System Recovery

6.1 Drive Failure Recovery

6.2 Overtemperature Shutdown Recovery (All Models)

System Recovery
For public disclosure
To recover from a drive failure, re-install the operating system and the device drivers that
are provided by GE Intelligent Platforms.
Windows Operating System
To re-install the Windows 7 operating system, refer to http://windows.microsoft.com.
RXi Display Device Drivers
The drivers and the instructions for installing them are available on the GE Intelligent
Platforms Support website, http://support.ge-ip.com.
The drivers consist of:
• VIA IDE driver (recommended)
• Ethernet drivers (Qty 2)
• SD card reader driver
• VIA graphics driver
• IDT audio codec driver
• Custom GE-IP drivers (Qty 6)
• GE-IP FpBtn driver for user-defined buttons (optional)
If the RXi Display overheats, it will shut down to protect critical components. When this
happens, the Overtemperature LED will blink red and then shut off quickly while the
entire unit shuts down. The Power On/Off LED turns off at the same time.
➢ ➢ To recover
1. Let the unit cool.
Touch Power On/Off to restart. The unit will return immediately to what it was
2.
doing when shutdown occurred. If you initiate a complete power cycle instead of
restarting immediately, the unit performs the normal power up cycle.
GFK-2898B 39