1
6
Hardware Installation
For public disclosure
8
4
Lever Screw Tightening Order
3.3.1 Removal
➢ ➢ To remove the RXi Display
Using a #2 Phillips screwdriver, loosen the lever screws.
1.
2.
Swing the eight levers on the back of the RXi Display to their retracted position, held
in place by a ball plunger.
Caution
3.
Insert a thin blade from the front between the gasket and panel wall at the top center
location to depress the latch.
4.
Tilt the RXi Display forward and remove it from the front of the enclosure.
3
7
Be careful to not drop the unit when tilting it
forward to remove it from the enclosure.
5
2
GFK-2898B 27