Pre-Installation Checks And Initial Startup; Unpacking And Inspection - GE PACSystems ICRXIDIXNE19LCTA User Manual

2 Pre-Installation Checks and Initial
Startup

2.1 Unpacking and Inspection

For phone numbers and email
addresses, refer to the section
Contact Information.

Pre-Installation Checks and Initial Startup

For public disclosure
Before installing and using the RXi Display, complete the following steps:
• Unpacking and inspection
• Initial startup
• Configuring Ethernet communications
Caution
Upon receiving the RXi Display, carefully inspect all shipping containers for damage. If
any part of the system is damaged, notify the carrier immediately. The damaged shipping
container should be saved as evidence for inspection by the carrier.
As the consignee, it is your responsibility to register a claim with the carrier for damage
incurred during shipment. However, we will fully cooperate with you should action be
necessary.
After unpacking the RXi Display, record all serial numbers. Serial numbers are required
if you need to contact Customer Care during the warranty period. All shipping containers
and packing material should be saved should it be necessary to transport or ship any part
of the system.
Verify that all components of the system have been received and they agree with your
order. If not , contact Customer Care. For technical help, contact Technical Support.
Before attempting to power up the RXi Display for the first time, inspect the unit for
loose or damaged components. If damage is observed (such as bent component leads or
loose components), contact GE Intelligent Platforms. Depending on the severity of the
damage, it may be necessary to return the product to the factory for repair.
Do not apply power to the unit if it has visible
damage. Applying power to a unit with damaged
components may cause additional damage.
GFK-2898B 19