Resetting All Transmitter Settings - Honeywell XYR 5000 Series User Manual

Honeywell Industrial Wireless
Rev 5
08/06
4.6.

Resetting All Transmitter Settings

To reset all Transmitter settings to their default state, you must
navigate to the DEFAULT menu option in the CONFIG menu via the
keypad.
Note Once at the default menu option, pressing the ENTER button
will display 'RESET?' on the LCD; which asks if you are sure you
want to reset the device to its default configuration. You will then be
prompted with 'NO' on the LCD. Pressing the ENTER button while
'NO' is being displayed will NOT reset the device. Pressing the
NEXT button will display 'YES' on the LCD. If you press the ENTER
button while 'YES' is being displayed the device will be reset.
Note Resetting the Transmitter by using the DEFAULT menu option
will not reset the TRIM or OFFSET values.
User Manual
Wireless Dual Discrete Input Transmitter
- 29 -