Makita EB7660TH Instruction Manual page 4

Starting up the blower
1. Make sure that there are no children or other people within
a working range of 15 meters, also pay attention to any ani-
mals near by.
2. Before operating, always check that the blower is safe for
operation:
— Check the security of the throttle lever. The throttle
lever should be checked for smooth and easy action.
— Check for proper functioning of the throttle lever lock.
— Check for clean and dry handles and test the function of
the l-O switch. Keep handles free of oil and fuel.
3. Start the Blower only in accordance with the instructions.
Do not use any other methods for starting the engine.
4. Use the blower and the tools supplied only for applications
5. Start the blower engine only after the entire tool has been
assembled. Operation of the tool is permitted only after all
the appropriate accessories are attached.
6. The engine is to be switched off immediately if there are any
engine problems.
7.
tightly around the handle, keeping the control handle cra-
in this position to have your machine under control at all
times. Make sure your control handle is in good condition
and free of moisture, pitch, oil or grease.
8. Always ensure a safe, well-balanced footing.
9. Carry the blower properly on both shoulders during opera-
tion. Do not carry the blower with only one shoulder strap.
Otherwise personal injury may result.
10. Operate the blower in such a manner as to avoid inhalation
of the exhaust gases. Never run the engine in enclosed
oxide is an odorless gas. Always ensure there is adequate
ventilation.
11. Switch off the engine when resting or leaving the blower
unattended. Place it in a safe location prevent danger to
the machine.
12. Never lay the hot blower onto dry grass or onto any com-
bustible materials.
13. All protective parts and guards supplied with the machine
must be used during operation.
14.
Transport
1. Shut off the engine during transport.
2. Position the blower safely during car or truck transportation
to avoid fuel leakage.
3. When transporting the blower, ensure that the fuel tank is
completely empty.
4. Lift the blower with holding carry handle when you carry it.
Do not drag the blower by nozzle, pipe or other parts.
5.
6. When transport the blower, bend your knee and make sure
you do not damage your shoulder and lower back.
Refuelling
1. Shut off the engine during refuelling, keep well away from
2. Avoid skin contact with petroleum products. Do not inhale
fuel vapor. Always wear protective gloves during refuelling.
Change and clean protective clothing at regular intervals.
3. Take care not to spill either fuel or oil in order to prevent soil
immediately after fuel has been spilt. Allow wet cloths to dry
before disposing in properly, covered container to prevent
spontaneous combustion.
4. Avoid any fuel contact with your clothing. Change your
5. Inspect the fuel cap at regular intervals making sure that it
stays securely fastened.
6. Carefully tighten the locking screw of the fuel tank. Change
-
4 ENGLISH