Create Destination - Cisco Firepower 4100 Command Reference Manual

create destination

create destination
To add a new Smart Call Home destination, use the create destination command. If a destination with the
specified name already exists, the command will fail.
To add or edit a Smart Call Home destination, use the enter destination command. If the specified destination
does not exist, it is created and entered; if the destination exists, it is entered.
You also can use the scope form of this command to enter an existing destination to assign or change properties.
Generally, "scoping into" an object is more convenient than entering it, since the objectʼs name is usually all
that is needed, whereas the enter form of the command often requires entering all its definition parameters.
To delete an existing destination, use the delete form of this command.
create destination name
delete destination name
enter destination name
scope destination name
Syntax Description
name
scope monitoring/scope callhome/scope profile/
Command Modes
Command History
Release
1.4(1)
When you create a new Smart Call Home destination, you are automatically entered into callhome/profile
Usage Guidelines
mode (monitoring/callhome/profile) with an asterisk indicating the new destination is not yet committed. You
can set the destination parameters—transport protocol and an email address—and then commit the new
destination information.
Note An email address is the only allowed destination address in a callhome profile.
After you create a Smart Call Home destination, the destination name cannot be changed. You must delete
the destination and create a new one.
Example
This example shows how to create, enter and configure a Smart Call Home destination:
firepower # scope monitoring
firepower /monitoring # scope callhome
firepower /monitoring/callhome # scope profile SLProfile
firepower /monitoring/callhome/profile # enter destination TestDest
firepower /monitoring/callhome/profile/destination* # set address user1@test.com
firepower /monitoring/callhome/profile/destination* # set protocol email
firepower /monitoring/callhome/profile/destination* # commit-buffer
firepower /monitoring/callhome/profile/destination #
Cisco Firepower 4100/9300 FXOS Command Reference
58
The name identifying the Smart Call Home destination.
Modification
Command added.
A R Commands