Cisco Firepower 4100 Command Reference Manual page 397

connect shell Commands
Command
mezz2fru
mrcout
network
obfl
post
power
programmables
sensors
sel
sldp
tasks
top
update
users
version
Additional Information
Show the mezz card 2 FRU information
Dump MrcOut*.txt
view network status in realtime ;
Dump Network information
Dump the OBFL - on-board fault log
dump - Dump OBFL
follow - Tail and Follow OBFL
tail - Dump the last 100 messages
Dump BIOS Post Information
view power status in realtime
Dump Blade Power Status
Dump Board Programmable Versions
view all sensors in realtime
sensors [all|power|temp|fault|pres|led]
all - Dump all Sensors (default)
power - Dump only Power Sensors
temp - Dump only Temprature Sensors
fault - Dump only Fault Sensors
pres - Dump only Presence Sensors
led - Dump only LED Sensors
Show the Blade SEL Information - system event log
Cisco CIMC Interactive Debug
This command performs interactive debug authentication with the aid of the user
and Cisco support personnel.
Dump Running Task Information
Run TOP Process Monitoring
Current Firmware Update Status
Dump IPMI Users
Get the Version Information
Cisco Firepower 4100/9300 FXOS Command Reference
connect cimc: Command List
395