Set Keyring-Name - Cisco Firepower 4100 Command Reference Manual

S Commands

set keyring-name

To assign a keyring to an IPSec connection, use the set keyring-name command.
set keyring-name name
Syntax Description
name
Connection (/security/ipsec/connection) mode
Command Modes
Command History
Release
1.1(1)
Use this command to add a keyring to an IPSec connection.
Usage Guidelines
Example
This example shows how to add a keyring to the current IPSec connection:
FP9300-A # scope security
FP9300-A /security # scope ipsec
FP9300-A /security/ipsec # enter connection testconn
FP9300-A /security/ipsec/connection # set keyring-name kr22
FP9300-A /security/ipsec/connection* # commit-buffer
FP9300-A /security/ipsec/connection #
Command
create connection
set keyring-passwd
The name of a keyring to be assigned to the IPSec connection; maximum of
16 characters.
Modification
Command added.
Description
Creates a new IPSec connection.
Specifies the passphrase for a keyring assigned to an IPSec connection.
Cisco Firepower 4100/9300 FXOS Command Reference
set keyring-name
195