Cisco Firepower 4100 Command Reference Manual page 284

show interface brief (connect fxos)
Veth2661
Veth2662
Veth2788
Veth2789
Veth2790
Veth2791
firepower(fxos)#
The following table describes the columns displayed by the
Table 4: show interface brief Fields
Field
Interface ID
VLAN
Type
Mode
Status
Cisco Firepower 4100/9300 FXOS Command Reference
282
1 virt trunk down
1 virt trunk up
1 virt trunk up
1 virt trunk down
1 virt trunk up
1 virt trunk up
Description
Interface or port identifier
VLAN identifier
Interface type:
– dedicated Ethernet interface
eth
– virtual interface
virt
Operational port mode:
– Layer 3 interface
layer3
– access port
access
– trunk port
trunk
– private VLAN
pvlan
– fabric port (F_port)
fabric
– 1q-tunnel (802.1Q tunnel) port
1qtunl
– fabric path
f-path
Interface state:
– port is operationally up
up
– port is operationally down
down
– interface is in test mode; no operational packets can be passed
testing
– trunking is enabled
trunking
– link is up, but port is not yet fully operational for traffic to the data plane,
link up
although it is operational for control protocols
nonParticipating
none
none
nonParticipating
none
none
show interface brief
S Commands
auto
auto
auto
auto
auto
auto
command.