Replacing The Fan Trays And Air Filter; About The Fan Trays And Air Filter - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

Replacing the Fan Trays and Air Filter

2 Three front captive screws
Replacing the Fan Trays and Air Filter
This section describes how to replace a fan tray and air filter from the Cisco NCS 6000 FCC and includes the
following topics:
The NCS 6000 FC is shipped with the air filter preinstalled.
Note

About the Fan Trays and Air Filter

This section provides an overview of the fan trays and air filter for the Cisco NCS 6000 FCC. These components
help circulate and filter the airflow throughout the FCC.
Figure 66: FCC Airflow
1
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
110
Front side of the FCC
Removing and Replacing Chassis Components
4 D-Sub connector cables (one per PCM)
6 Exhaust air from PMs