Makita JR3070CT Technical Information page 15

W
iring diagram
[2] Wiring in Handle
Route the lead wires to
switch under the switch.
If rubber band is used,
hold the parts with it.
Noise suppressor
If noise suppressors
are used, put them here.
Switch
Rubber band
Speed control dial
Do not route the lead wires
over the rib.
Be sure that the lead wires from
the opening of motor housing
holder are tight in this portion.
Controller
Rib
Choke coil
If choke coil is used,
put it here.
P 15/ 15
Lead wire
holder
Fix lead wires with
lead wire holder.
Do not route the lead wires
over the ribs.