NEC UNIVERGE SV9100 Features And Specifications page 1341

Conditions
VRS record time is fixed at two minutes and cannot be changed.
The Automated Attendant (VRS) can answer up to 16 calls simultaneously.
If Synchronous Ringing is enabled, the Preamble message cannot be used.
The maximum number of VRS ports is 16 when the SV9100 is properly licensed.
When the DISA/VRS Ring Group Transfer (Programs 25-03 and 25-04) is
set to 104 (Speed Dial Bin), Speed dial will be treated as an internal call no
matter what Program
13-01-01 is set to. If an outside number is needed, the trunk access code must
be put into the speed dial bin.
When Program 25-16-02, is set to 0 = Off (Do not detect DTMF), after
playing a VRS greeting, the transfer destination set in Program 25-03-01 is
followed.
Program 25-03-01 is set on a per trunk port base, not Dial-in number base.
A DISA Password can be detected regardless of Program 25-16-02 setting.
If an outside caller dials an invalid extension number when connected to the
VRS Automated Attendant or calling in on a DISA trunk, the following options
are available to route these calls:
Extension Number (e.g., operator)
F-Route Dial (e.g., outside phone number)
Default Settings
Disabled
System Availability
Terminals
None
Required Component(s)
VRS Port License (1001)
Related Features

Transfer
1341