NEC UNIVERGE SV9100 Features And Specifications page 1158

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Packet loss must not exceed 1%

Data switches must be manageable

Routers must provide QOS

Adequate bandwidth for estimated VoIP traffic

Depending on how QoS policies are built in the network, assignments may be needed in the

VoIP Resource Chart

S1 = Secondary System #1 S2 =

Secondary System #2

The number of conference blocks in a NetLink network is the same as a stand-alone

Invalid data is displayed in the LCD of the terminal if Program 51-01 is enabled.

When installing a Secondary System in a Netlink network and the Secondary System has

GCD-LCA blades installed, the GCD-LCA blades will come online and assign ports before

any GCD-DLCA blades are assigned.

Always connect to the Primary System when using PCPro.

The following programs require a reset after making a change using PCPro, WebPro or

Handset programming:

Primary System