NEC UNIVERGE SV9100 Features And Specifications page 1254

Program
Program Name/Description
Number
Single Line Telephone Basic Data Setup –
15-03-09
Caller ID Function - For External Module
Enable/Disable the Caller IFD FSK signal for an
external Caller ID Module or a 3
telephone with Caller ID display.
If voice mail is used, set this to 0 for the system
integration code to be correct.
15-07-01 Programmable Function Keys
Assign a Voice Mail key to an extension. You
must enter the Voice Mail key code (code 77)
followed by:
Your own extension number if you are
setting up your own Voice Mail key.
A virtual extension number if you are setting
up a Message Centre key for a virtual
extension.
A co-worker's extension number if you are
setting up a Message Centre key for an
installed extension.
An uninstalled extension number if you are
setting up a Message Centre key for an
uninstalled extension.
(Optional) Assign a Voice Mail Record key
to an extension (code 78).
(Optional) Assign a Personal Answering
Machine Emulation key (code 16).
(Optional) Use a Call Redirect key (49) to
allow a user to transfer a call to another
extension or voice mail without answering
the call.
16-02-01 Department Group Assignment for
Extensions
Set the Department Group called by the pilot
number and the extension priority when a group
is called.
Call Pickup Groups are set up in 23-02.
When setting up hunt group priorities the VM
ports must be assigned as port 1 = priority 1, port 2
= priority 2 and so on. Failure to do this causes the
VM to answer but no audio is heard.
System Options for Multiline Telephones –
20-02-09
Disconnect Supervision
Enable/Disable disconnect supervision for the
system trunks.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to the voice
mail extensions. Use COS 14 for all time
modes.
20-09-02 Class of Service Options (Incoming Call
Service) – Caller ID Display
Turn Off or On the Caller ID display at an
extension.
20-11-01 Class of Service Options (Hold/Transfer
Service) – Call Forward All
Turn Off or On an extension user ability to set
Call Forward All.
0 = Disable (Off)
1 = Enable (On)
rd
-Party vendor
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Department Groups 1 ~ 64
Priority 1 ~ 9999
0 = Disable
1 = Enable
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 = Off
1 = On
1254
Input Data
Default = 1
extensions in
Department
Group 1 with
priority in port
order:
Port 1 priority = 1
Port 256 priority
= 256
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
Default
0
1