NEC UNIVERGE SV9100 Features And Specifications page 1126

Guide to Feature Programming
Program
Program Name/Description
Number
Department Group Basic Data Setup –
16-01-03
Department Routing When Busy (Auto Step
Call)
Assign whether a call to busy station Hunts (1)
or Not Hunts (0) to the next available member
of the Hunt Group (Department Group).
Refer Department Calling
Department Group.
16-02-01 Department Group Assignment for
Extensions
Set up the Department Group called by the pilot
number and the extension priority when a group
is called.
Call Pickup Groups are set up in 23-02.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
20-09-07 Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On Call Queuing to the extension.
Set to Off for Station Hunting to work.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
20-13-06 Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension to Manually or
Automatically receive off-hook signals. Set to 0
for Station Hunting to work.
This setting is to receive incoming call
signaling information during call queuing.
Operation
To make a Step Call:
1. Place a call to a busy extension.
0 = Normal (Intercom caller to
busy department member hears
busy)
1 = Circular (Intercom callers to
busy department member routes
to idle member)
to set up the
Department Groups 1 ~ 64
Priority 1 ~ 9999
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 = Manually
1 = Automatically
1126
Input Data
Default = 1
extensions in
Department
Group 1 with
priority in port
order:
Port 1 priority = 1
Port 256 priority
= 256
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
Default
0