Setup Menu; Language; Email Setup - Honeywell VISTA User Manual

To access Total Connect Server Information and Z-Wave Status from the
VAM, do the following:
1. From the Main menu, click Setup > System; enter the installer code (if
required). Click the TC SERVER button.
2. The Total Connect Server Setup screen is displayed with the current
Server information and Z-Wave Status (enabled/disabled).
NOTE: These fields are for reference only and cannot be edited.
3. Click the Diagnostic Connect button to test the connection to the
AlarmNet servers.

Setup Menu

Use the setup menus to create local/remote access logins (account icon), set
the time and date, Language, User Profile, and connect VAM to a new
wireless router.

Language

The VAM supports 4 languages: English (default), Español, Português,
Français. To change click Settings > Language, select the desired
language, and then click "Save".

Email Setup

Email setup allows you to receive email notifications when one or more
system events occur. Your installer may have already set up email
notifications for you.
NOTE: Email notification requires that you have an active email address.
• An SMTP account needs to be assigned to establish the email server
domain (i.e., the "from" address). When an email is transmitted, the VAM
will use this email to send the message.
• There are four programmable sets of events (labeled "Event 1 – Event 4").
• Each event 1-4 can send notifications to up to four email addresses
(notification messages are pre-defined by the system based on the event).
• For each event 1-4, choose the conditions that will trigger notification:
Event Type Conditions that Trigger Notification
Disarm, Away Secured, Arm Stay
Security
Alarm, Trouble, Restore
Zones
Temp Above or Temp Below an assigned temperature
Thermostat
Door Lock Unlocked or Locked
Opened or Closed
Garage Door
– 29 –