Arming Multiple Partitions; Steps To Disarm The System - Honeywell VISTA User Manual

3. The screen displays the exit delay countdown. When exit delay expires, the
screen displays "Armed."

Arming Multiple Partitions

NOTES:
• Some systems may not have multiple partitions. In addition, your code
must be authorized to arm multiple partitions.
• Mobile view cannot be used to arm multiple partitions. Mobile view can
control only the partition VAM was assigned to when installed.
1. From the "Home" screen, select Security and then select Arm Multi-
Partition.
2. Choose the desired arming mode.
3. Enter the user code authorized to access other partition(s).
4. Select the partition from the list on the screen, and press OK.
5. If desired, select ALL to arm all partitions listed.

Steps to Disarm the System

IMPORTANT: If you return to your home or business and the main
burglary sounder is on, DO NOT enter the premises, but call the police
from a nearby safe location. If you return to your home or business after
an alarm has occurred and the main sounder has shut itself off, the
keypad beeps rapidly upon entering, indicating that an alarm has
occurred during your absence. LEAVE IMMEDIATELY and
CONTACT THE POLICE from a nearby safe location.
If armed in AWAY mode:
1. When you enter the premises, the Entry Delay Active message appears.
2. Enter your 4-digit user code. The system disarms.
If armed in STAY or NIGHT mode:
1. Select the Disarm button.
2. Enter your 4-digit user code. The system disarms.
Steps to Disarm Multi-Partitions
1. Select Security.
2. Choose Arm Multi-Partition.
3. Click the Disarm button.
4. Enter your 4-digit user code.
5. Highlight the partition(s) to disarm and press OK, or press ALL to disarm
all partitions.
– 24 –