Configuring Call Home
Specifying HTTP Proxy Server
To specify an HTTP proxy server for sending Call Home HTTP(S) messages to a destination, perform the
following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. http-proxy {ipv4-address | ipv6-address name} name
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Device#
Step 2
call-home
Example:
Device(config)#
Step 3
http-proxy {ipv4-address | ipv6-address name} name
Example:
Device(config)#
Enabling AAA Authorization to Run Cisco IOS Commands for Call Home Messages
To enable AAA authorization to run Cisco IOS commands that enable the collection of output for a Call Home
message, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. aaa-authorization
4. aaa-authorization [username username]
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
22
configure terminal
call-home
http-proxy 1.1.1.1 port 1
Purpose
Enters global configuration mode.
Enters call home configuration mode.
Specifies the proxy server for the HTTP request.
Call Home