Hardware Compatibility Matrix For The Cisco Cbr Series Routers; Prerequisites For Usage-Based Billing (Samis) - Cisco cBR-8 Configuration And Troubleshooting Manual

Hardware Compatibility Matrix for the Cisco cBR Series Routers

Hardware Compatibility Matrix for the Cisco cBR Series Routers
The hardware components that are introduced in a given Cisco IOS-XE Release are supported in all
Note
subsequent releases unless otherwise specified.
Table 22: Hardware Compatibility Matrix for the Cisco cBR Series Routers
Cisco CMTS Platform
Cisco cBR-8 Converged
Broadband Router

Prerequisites for Usage-Based Billing (SAMIS)

The Usage-based Billing feature has the following prerequisites:
• Cable modems must be compliant with DOCSIS 1.0 or DOCSIS 2.0, OSSI version 3.0 and DOCSIS
• Cable modems that are being monitored should use a DOCSIS configuration file that defines upstream
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
122
3.0.
and downstream primary service flows using Service Class Naming (SCN [TLV 24/25, subTLV 4]). If
dynamically-created service flows are to be monitored, they should also be created with SCN names.
Processor Engine
Cisco IOS-XE Release 16.5.1 and
Later Releases
Cisco cBR-8 Supervisor:
• PID—CBR-SUP-250G
• PID—CBR-CCAP-SUP-160G
• PID—CBR-CCAP-SUP-60G
• PID—CBR-SUP-8X10G-PIC
Usage-Based Billing (SAMIS)
Interface Cards
Cisco IOS-XE Release 16.5.1 and
Later Releases
Cisco cBR-8 CCAP Line Cards:
• PID—CBR-LC-8D30-16U30
• PID—CBR-LC-8D31-16U30
• PID—CBR-RF-PIC
• PID—CBR-RF-PROT-PIC
• PID—CBR-CCAP-LC-40G-R
Cisco cBR-8 Downstream PHY
Modules:
• PID—CBR-D30-DS-MOD
• PID—CBR-D31-DS-MOD
Cisco cBR-8 Upstream PHY
Modules:
• PID—CBR-D30-US-MOD
• PID—CBR-D31-US-MOD