Examples For Enabling Usage Billing Using Snmp Mode - Cisco cBR-8 Configuration And Troubleshooting Manual

Enabling Usage-based Billing Feature File Mode Using SNMP Commands
ccmtrCollectionAggregate.0 -i 1
workstation#
Step 5 (Optional) To specify the source-interface for the billing packets, set the ccmtrtrCollectionSrcIfIndex object to 1 (true).
The default is for the billing packets to automatically select a source-interface.
Example:
workstation# setany -v2c
ip-address rw-community-string
ccmtrtrCollectionSrcIfIndex.0 -i 1
workstation#

Examples for Enabling Usage Billing using SNMP Mode

The following example shows the Usage-based Billing feature being configured using SNMP commands.
The following display shows that a Cisco CMTS router at IP address 10.8.8.21 is configured with the default
configuration (the Usage-based Billing feature is disabled):
workstation# getmany -v2c 10.8.8.21 rw-string ciscoCableMeteringMIB
ccmtrCollectionType.0 = none(1)
ccmtrCollectionFilesystem.0 =
ccmtrCollectionCpeList.0 = true(1)
ccmtrCollectionAggregate.0 = false(2)
ccmtrCollectionStatus.0 = 0
ccmtrCollectionDestination.0 =
ccmtrCollectionTimestamp.0 = 00 00
ccmtrCollectionNotifEnable.0 = true(1)
workstation#
The following SNMP commands are then given to enable the Usage-based Billing feature and to configure
it for file mode:
workstation# setany -v2c 10.8.8.21 rw-string ccmtrCollectionType.0 -i 2
workstation# setany -v2c 10.8.8.21 rw-string
ccmtrCollectionFilesystem
.0 -D disk1:
workstation#
These commands add the following line to the router's running configuration file:
Router# show running-config | include metering
cable metering filesystem disk1:
Router#
The following SNMP display shows the new configuration, after the Cisco CMTS has successfully written a
billing record:
workstation# getmany -v2c 10.8.8.21 rw-string ciscoCableMeteringMIB
ccmtrCollectionType.0 = local(2)
ccmtrCollectionFilesystem.0 = disk1:
ccmtrCollectionCpeList.0 = true(1)
ccmtrCollectionAggregate.0 = false(2)
ccmtrCollectionStatus.0 = success(1)
ccmtrCollectionDestination.0 = disk1:UBR7246.cisco.com-20030925-185827
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
140
00 00 00 00 00 00
Usage-Based Billing (SAMIS)