GE IC695PNC001 User Manual page 35

ACTIVE LED
The active LED indicates the status of PROFINET connections.
Green, ON
Green, blink pattern
Amber, ON
OFF
USB LED
The USB LED indicates activity on the USB port.
Green, Blinking
Green, blink pattern
OFF
Port LEDs
The PROFINET Controller has four Port LEDs, PORT1, PORT2, PORT3, and PORT4 that indicate
link speed, link connection and link activity corresponding to the four possible external Ethernet
ports.
Blue, ON
Blue, blinking
Green, ON
Green, blinking
Purple, ON
Purple, blinking
Green, blink pattern
OFF
Red, ON
GFK-2571A
All configured PROFINET devices have established PROFINET
connections
Fatal error. Flashes once between error codes blinked on the OK
LED
At least one configured PROFINET device has established a
PROFINET connection, but other configured PROFINET devices
are not configured
No configured PROFINET Devices have established PROFINET
connections to the PROFINET Controller, or hardware
configuration is cleared.
USB port activity
Fatal error. Flashes once between error codes blinked on the OK
LED
No USB port activity
Link connected, 1000 Mbps
Port active, 1000 Mbps
Link connected, 100 Mbps
Port active, 100 Mbps
Link connected, 10 Mbps
Port active, 10 Mbps
Fatal error. Flashes once between error codes blinked on the OK
LED
The associated Ethernet port is not connected to an active link
Port 3 and port 4 only. Incompatible SFP plugged into port.
Chapter 2 Installation
2
2-11