Configure Video Output - Cisco DMP 4305G Getting Started Manual

Hide thumbs Also See for DMP 4305G:
Table of Contents

Advertisement

Configure Settings

Configure Video Output

Before You Begin
Procedure
Step 1
Click DMP Display Attributes in the Settings list.
The display autodetection feature is enabled by default. However, it fails unless you use either:
Note
a.
b.
c.
Choose from the Color Space list the absolute color space that your presentation system uses.
Step 2
Did you choose RGB as the color space? If so, choose an option from the Color Component Order list
Step 3
to define the order in which to store red, green, and blue data.
The color component order is sometimes called the left-to-right additive color model.
Move any or all of the sliders as needed to compensate for presentation system deficiencies in video
Step 4
(brightness, contrast, or saturation) or audio (channel volume).
Click Apply to confirm your choices and to implement them until you change them or until you restart
Step 5
your DMP.
Step 6
Click Show IP — in the DMP Mode area — to test whether your choices are suitable ones for your
presentation system.
Getting Started Guide for Cisco Digital Media Players
36
Connect your DMP to its presentation system.
Log in to
DMPDM.
An HDMI signal cable.
An HDMI signal cable in combination with an HDMI-to-DVI adapter.
Are you satisfied with the choices and entries that the autodetection feature made for you? If so, you are done
with this section and you can go now to the
Otherwise, if you are not satisfied — or if your display does not support HDMI connections — do the following.
Choose Disable from the DMP Display Autodetection (requires HDMI) list.
Choose a standard from the Display Standard list that applies in your country. For example, even
though our factory default selection is NTSC_M, your country might use PAL instead.
Choose your connector and signal type from the Interface (DMP display output) list. For example,
you might use SVIDEO.
If you do not know which options to choose, see the manufacturer documentation for your
presentation system.
"Protect Your DMP from Unauthorized Management" section on page
44.
78-19212-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmp 4310gDmp 4400g

Table of Contents