Grizzly G4003G Owner's Manual page 60

T10109—Gunsmith D-1 Back Plate
These D1-5 Back Plates have spiders machined
into them, which allows shorter barrels to be sup-
ported through the headstocks of larger lathes.
(Guard removed for clarity.)
Figure 90. T10109 Gunsmith D1-5 Backplate.
H6095—Digital Readout (DRO)
This is one of the finest two-axis DRO's on
the market today. Features selectable resolution
down to 5µm, absolute/incremental coordinate
display, arc function, radius/diameter function,
master reference datum, 199 machinist defined
tools, double sealed scales, inches/millimeters
and linear error compensation. Don't be fooled
by our low prices—this is only a reflection of the
absence of any "middlemen" in the marketing
structure—not a reflection of the quality.
Figure 91. H6095 Digital Readout.
order online at
-58-
www.grizzly.com
T10118—Tailstock Digital Readout
Here's the slickest setup for managing the depth
of cut with your tailstock! Just set up, touch off and
zero out! You're going to know the exact position
of the tool. Both the scale display and remote
display come with a 0.0005" (five ten-thousandths
of an inch) resolution, inch or millimeter display,
zero keys and ON/OFF keys. The scale has an 8"
range and its display features ABS or INC mode
as well as a Hold key. Both displays read indepen-
dently of each other, too! You'll be able to see your
depth at a glance with the large,
remote display. The 6' data cable is long enough
to mount the remote display in almost any conve-
nient location. Tailstock adapter is not included,
but can be shop made to fit your lathe.
Figure 92. T10118 Tailstock Digital Readout.
H7991—Mini Mag Base Indicator Set
Set features a 7 Jewel indicator with 0.0005" reso-
lution. The mini magnetic base measures 1
1 ⁄ " x 1 ⁄ " and includes a single lock knob for
3 3
16 8
easy set-ups. Includes 2 dovetail tool posts and a
protective plastic case.
Figure 93. H7991 Mini Mag Base Indicator Set.
1-800-523-4777
or call
Model G4003G (Mfd. Since 1/15)
⁄ " character
1
2
⁄ " x
3
16