Makita DTD155 Instruction Manual page 8

Changing the impact force
1
2
3
1. Hard 2. Soft 3.
5. Button
Impact force grade displayed
on panel
Hard
Soft
NOTE:
impact force and speed are the same as hard mode.
NOTE:
NOTE: While pulling the switch trigger, the impact force grade cannot be changed.
4
5
4. Changed in three steps
Maximum blows
-1
3,900 min
-1
1,600 min
-1
3,900 min
You can change the impact force in three steps: hard,
Every time the button is pressed, the number of blows
changes in three steps.
driving screws with good control.
In this mode, the tool drives a screw with low-speed
trigger, the impact force can be changed.
Purpose
speed are desired.
avoid screw thread breakage.
control.
8 ENGLISH
Example of application
tightening bolts.
ening small screws such as M6.
-
-