Maintenance - Makita GA4040C Instruction Manual

WARNING:
wheel, be sure to use only the special wheel
guard designed for use with cut-off wheels. (In
some European countries, when using a dia-
mond wheel, the ordinary guard can be used.
Follow the regulations in your country.)
pressure. Do not attempt to make an excessive
depth of cut. Overstressing the wheel increases
the loading and susceptibility to twisting or
binding of the wheel in the cut and the possibility
of kickback, wheel breakage and overheating of
the motor may occur.
piece. Let the wheel reach full speed and care-
fully enter into the cut moving the tool forward
over the workpiece surface. The wheel may
bind, walk up or kickback if the power tool is
started in the workpiece.
the cut-off wheel (as in grinding) will cause the
wheel to crack and break, causing serious per-
lar to the material being cut.
Operation with wire cup brush
(optional accessory)
CAUTION:
load, insuring that no one is in front of or in line
with brush.
out of balance. Use of damaged brush could
broken brush wires.
1. Wire cup brush
Unplug tool and place it upside down allowing easy
access to spindle. Remove any accessories on spindle.
Thread wire cup brush onto spindle and tighten with
supplied wrench. When using brush, avoid applying too
much pressure which causes over bending of wires,
leading to premature breakage.
Operation with wire wheel brush
(optional accessory)
CAUTION:
tool with no load, insuring that no one is in front
of or in line with the wire wheel brush.
or which is out of balance. Use of damaged wire
from contact with broken wires.
Wheel can shatter during use and guard helps
-
-
1. Wire wheel brush
Unplug tool and place it upside down allowing easy
access to spindle. Remove any accessories on spindle.
Thread wire wheel brush onto spindle and tighten with
the wrenches.
When using wire wheel brush, avoid applying too much
pressure which causes over bending of wires, leading
to premature breakage.

MAINTENANCE

1 CAUTION:
unplugged before attempting to perform inspec-
tion or maintenance.
or the like. Discoloration, deformation or cracks
may result.
13 ENGLISH
1