Honeywell XYR 6000 User Manual page 14

Contents
Figures
The Universal I/O transmitter can be configured, using channel instantiation, for the following channel I/O
combinations, according to model number.
The input channels can be configured for the following input types by using the wireless system's user
interface to assign temperature, HLAI or discrete input types to each channel on OneWireless systems or
other wireless systems that support channel instantiation. Wireless systems which do not support channel
instantiation are supported with an available PC software tool to preinstantiate specific transmitter channel
IO combinations before provisioning via the infrared interface. Alternate device descriptor (DD) files
matching the specific channel combinations are then used with the device, as indicated below.
STUW700
Channel 1
DI
DI
DI
HLAI
HLAI
HLAI
T/C or mV
T/C or mV
T/C or mV
STUW701
Channel 1
DI
DI
DI
HLAI
HLAI
HLAI
T/C or mV
T/C or mV
T/C or mV

Up to 2 T/C, millivolt or DI (contact closure) channels
2 XYR 6000 ISA100.11a Compliant Universal I/O Transmitter User's Manual
Channel 2
DI
HLAI
T/C or mV
DI
HLAI
T/C or mV
DI
HLAI
T/C or mV
Channel 2
DI
HLAI
T/C or mV
DI
HLAI
T/C or mV
HLAI
DI
T/C or mV
Channel 3
HLAI
HLAI
HLAI
HLAI
HLAI
HLAI
HLAI
HLAI
HLAI
Channel 3
DO
DO
DO
DO
DO
DO
DO
DO
DO
Alternate DDs
Available
Yes
Yes
Yes
Yes
(Factory default)
Yes
Yes
Alternate DDs
Available
Yes
Yes
Yes
Yes
Yes
(Factory default)
Yes
Revision 1
January 2011