Completing The Initial Configuration - Cisco UCS C220 Quick Start Manual

Completing the Initial Configuration

•
•
Site Requirements and Safety Information
Select and prepare an installation site that meets the requirements that are described in the
C220 Server Installation and Service Guide
For specific compliance and safety information, see the
for the Cisco UCS C-Series Servers
Shipping Carton Contents
When you receive the server, verify the contents of the shipping carton to ensure that you have all items
necessary for installation. Save the packing material in case you need to repack the server. If any item is
missing or damaged, contact your Cisco representative or reseller for instructions.
The contents of the shipping carton include these items:
•
•
•
•
•
•
•
•
Rack Mounting
For Content Server rack mounting procedures, see the
C220 Server Installation and Service
Completing the Initial Configuration
You need these items to complete the Content Server initial configuration:
•
•
•
These are the initial configuration tasks:
Cisco TelePresence Content Server Release 7.0 Quick Start Guide
6
Shipping Carton Contents, page 6
Rack Mounting, page 6
Content Server
USB media kit (used only for a software reimage)
Rail kit
Serial cable
Ethernet cable
Cable kit power
Accessory kit
Printed card with URLs for product documentation and RoHS information for China
USB keyboard, mouse, and VGA monitor.
Windows Server 2012 product activation key—see the product activation key label on the Content
Server chassis.
IP address, subnet mask, and gateway for:
Content Server.
–
Cisco Integrated Management Controller (CIMC) Configuration Utility.
–
on Cisco.com.
Regulatory Compliance and Safety Information
on Cisco.com.
"Installing the Server"
Guide.
Cisco UCS
chapter of the Cisco UCS