Cisco UCS C220 Quick Start Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS C220
  6. Quick start manual
Cisco UCS C220 Quick Start Manual

Cisco UCS C220 Quick Start Manual

Telepresence content server
Hide thumbs Also See for UCS C220:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation and Servicing Manual, User Manual
Cisco TelePresence Content Server Release 7.0
Quick Start Guide
March 2017
This document contains information about installing and configuring the Cisco TelePresence Content
Server Release 7.0. See these sections:
•
Product Overview, page 2
Technical Specifications, page 5
•
Hardware and Software Limitations, page 5
•
•
Installing the Content Server, page 5
Completing the Initial Configuration, page 6
•
Task 1: Connect and power on the Content Server and configure CIMC, page 7
–
–
Task 2: Set the local administrator password, page 7
Task 3: Enter the Windows Server 2012 activation key
–
Task 4: Configure a static IP address, page 9
–
Task 5: Set the date and time, page 9
–
Task 6: Enable Remote Desktop Connection, page 9
–
Task 7: Configure SQL Settings
–
Task 8: Install a security certificate
–
Task 9: Configure the H.323/SIP registration settings
–
Task 10: Make a test recording
–
Additional Content Server Setup, page 13
•
Troubleshooting and Technical Support, page 15
•
Related Documentation, page 15
•
Providing Documentation Feedback, page 16
•
Obtaining Documentation and Submitting a Service Request, page 16
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Advertisement

Table of Contents
loading

Related Manuals for Cisco UCS C220

Summary of Contents for Cisco UCS C220

  • Page 1 Cisco TelePresence Content Server Release 7.0 Quick Start Guide March 2017 This document contains information about installing and configuring the Cisco TelePresence Content Server Release 7.0. See these sections: • Product Overview, page 2 Technical Specifications, page 5 • Hardware and Software Limitations, page 5 •...

  • Page 2: Product Overview

    This release introduces the fourth-generation Content Server hardware that runs Cisco Content Server Release 7.0 software. The fourth-generation Content Server is based on the Cisco UCS C220 M4 server. (For more information, see the Cisco UCS C220 Server Installation and Service Guide on Cisco.com.)
  • Page 3 1.7 x 16.9 x 28.5 in. (4.32 x 43 x 72.4 cm) Processors Two Intel Xeon E5-2665 processors. Memory Four 8-Gb DDR3 low-voltage DIMMs provide a total of 32 GB of memory. Cisco TelePresence Content Server Release 7.0 Quick Start Guide...
  • Page 4 2. PCIe = peripheral component interconnect express 3. RAID = redundant array of independent disks 4. NIC = network interface card 5. SAS = serial attached SCSI 6. SATA = serial advanced technology attachment Cisco TelePresence Content Server Release 7.0 Quick Start Guide...

  • Page 5: Technical Specifications

    On fourth-generation hardware, Content server is not supported on CIMC BIOS version 2.0(3e) with manufacturing USB. It works fine with CIMC BIOS version 2.0(10e). Installing the Content Server Review these sections for installation information: Site Requirements and Safety Information, page 6 • Cisco TelePresence Content Server Release 7.0 Quick Start Guide...

  • Page 6: Completing The Initial Configuration

    When you receive the server, verify the contents of the shipping carton to ensure that you have all items necessary for installation. Save the packing material in case you need to repack the server. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. The contents of the shipping carton include these items: Content Server •...

  • Page 7: Task 1: Connect And Power On The Content Server And Configure Cimc

    The Content Server does not support dual NIC configuration. Note Press F10 to save your settings and restart the Content Server. Step 5 Task 2: Set the local administrator password Follow these steps: Cisco TelePresence Content Server Release 7.0 Quick Start Guide...
  • Page 8 If the Content Server is not connected to the Internet, you can follow the on-screen instructions to activate Windows Server 2012 by using your phone. When the product key is verified and activated, click Close. Step 4 Cisco TelePresence Content Server Release 7.0 Quick Start Guide...

  • Page 9: Task 5: Set The Date And Time

    Step 4 Task 6: Enable Remote Desktop Connection Beginning with Cisco Content Server Release 7.0, all Windows Server 2012 administration and configuration is accomplished by using Windows Remote Desktop Connection to access the server administration interface. Follow these steps to enable remote desktop on the Content Server:...

  • Page 10: Task 7: Configure Sql Settings

    Under Connections, click the Content Server Windows 2012 server “machine_name (local computer)”. Step 5 Step 6 Click Server certificates in the machine_name Home window. Step 7 Under Actions, click Import to import a new certificate. Cisco TelePresence Content Server Release 7.0 Quick Start Guide...

  • Page 11: Task 9: Configure The H.323/Sip Registration Settings

    In the Content Server web interface, go to Management > Configuration > Site settings. Step 3 Enter the System name that is used by the Cisco TelePresence Management Suite to identify the Content Step 4 Server. (Optional) Select the Show in browser title check box to display the System name in the browser title bar when using the web interface.

  • Page 12: Task 10: Make A Test Recording

    Go to the View Recordings tab. You should see a thumbnail with a red recording dot for the recording Step 4 in progress. End the call from the endpoint or by clicking on the thumbnail followed by Edit recording and End call. Step 5 Cisco TelePresence Content Server Release 7.0 Quick Start Guide...

  • Page 13: Additional Content Server Setup

    Recording Setup > Media servers. If you want to automatically upload media to Cisco Media Experience Engine 3500, Cisco Show and Share, Podcast Producer, or iTunes U, you should create a media server for each of those applications. Selecting the default media server configurations You can make the media server configurations that you created the system defaults in Site settings.
  • Page 14 You can set the Default Recording alias in the System defaults section of Site settings. Configuring TMS to use the Content Server The Cisco TelePresence Management Suite (TMS) can be used to record scheduled one-off or recurrent conferences. See the...

  • Page 15: Troubleshooting And Technical Support

    Cisco UCS C220 Documentation http://www.cisco.com/en/US/products/ps10493/tsd_products_support_series_home.html Cisco Capture Transform Share Documentation • http://www.cisco.com/en/US/products/ps12130/products_installation_and_configuration_guides_l ist.html Information About Accessibility and Cisco Products For information about the accessibility of this product, contact the Cisco accessibility team at accessibility@cisco.com. Cisco TelePresence Content Server Release 7.0 Quick Start Guide...

  • Page 16: Providing Documentation Feedback

    The RSS feeds are a free service. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

Table of Contents