Shutting Down Or Rebooting Guest Os On The Lpar To Migrate - Hitachi NVM Navigator v03-07 User Manual

Setup2: Setting up local accounts
For the prerequisite setups' procedures, see "Procedure for Shutdown
mode".
Note2: Failure on Remote Shutdown of Windows Server 2008
When Forced shutdown check box inside Guest OS Information (for
remote shutdown) subgroup of Migration Setting group box is not
checked while Shutdown Guest OS (Source) check box inside
migration option subgroup of the same group box is checked in the
"Migration" or "Add Migration" window, the remote shutdown specified to
Windows Server 2008 uses standard shutdown process. In such a case,
shutdown is available only when there is no other user logged in to the OS
(including auto log-in). When there is any user logged in to the OS, the
remote shutdown fails and hence the migration execution that follows fails.
In order to force the remote shutdown even when there is any user logged
in to the OS (including auto log-in), check the aforementioned Forced
shutdown check box in the "Migration" or "Add Migration" window.
In the event of a failed remote shutdown with unknown log-in status (usage
status) of the OS, manually execute power-off of the target server from an
SC/BSM, the web console for CB500, or the web console for CB2500, and then
retry the migration execution.
Note3: Failure on Remote Shutdown of Windows Server 2003
Shutdown process on Windows Server 2003 may interrupt on the
conditions shown on Microsoft Support.
In such a case, solve the problem by stopping the screen saver at first.
Then it may be required to stop the screen saver and logon screen saver of
the guest OS shut down, depending on the usage environment of guest OS.
For the detail information, see Microsoft Support.
Microsoft Support at
Note4: Obscure if guest OS is being logged in to and screen saver's and logon
screen saver's setting
It may be obscure if guest OS on the destination LPAR is being logged in to
and how screen saver and logon screen saver of the guest OS are set to,
In such a case, if remote shutdown fails, turn off power of the guest OS
and retry the migration.
Shutting down or rebooting guest OS on the LPAR to
migrate
Do not shut down or reboot the guest OS running on the LPAR to migrate
while the LPAR is migrating. In this case, LPAR migration in progress is
cancelled with the following message.
http://support.microsoft.com/
Usage notes
HVM Navigator User's Guide - Migration
5-17