12/04/18 14:37:48 42TF2C00_075
Instrument Panel Indicators
Parking Brake and
Brake System Indicator
(Red)
This indicator has two functions:
1.
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tyres.
You will also see the symbol
''
'' with a ''RELEASE
PARKING BRAKE'' message on
the multi-information display.
70
Instruments and Controls
2.
If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
317
.
You will also see the symbol
''
'' (for the brake fluid level)/
''
'' (for the brake system)
with a ''BRAKE FLUID LOW'' or
''CHECK SYSTEM'' message on
the multi-information display (see
page
317
).
Brake System Indicator
(Amber)
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and START (III) position.
When the brake system indicator
(amber) comes on and stays on,
there is a problem with the Creep
Aid System or Brake Assist (the
normal brake operates properly).
Have your vehicle checked by your
dealer. For more information, see
page
232
.
You will also see the symbol ''
with a ''CHECK SYSTEM'' message
on the multi-information display (see
page
92
).
''