Door Locks; Power Door Locks - Honda FIT 2014 Owner's Manual

12/04/18 14:45:55 42TF2C00_139
Ignition Switch, Door Locks
− Use this position
START (III)
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver's door. You will also see
the symbol '' '' with an
''IGNITION KEY'' message on the
multi-information display with the
ignition switch in the LOCK (0)
position. Remove the key to turn off
the beeper and the warning symbol.
The shift lever must be in Park
before you can remove the key from
the ignition switch.
134
Instruments and Controls

Power Door Locks

Unlock
LOCK TAB
Lock
Each door has a lock tab next to the
inside door handle. When you pull
out or push in the lock tab on the
driver's door, all doors and the
tailgate lock or unlock. The lock tab
on each passenger's door only locks
and unlocks that door.
When the door is unlocked, the red
mark on the lock tab is shown.
All doors and tailgate lock or unlock
when you use the key to lock or
unlock the driver's door.
Locking and unlocking the driver's
door will also lock and unlock the
fuel fill door (see page 197 ).
To lock any passenger's door when
getting out of the vehicle, pull the
lock tab out and close the door. To
lock the driver's door, pull and hold
the outside door handle then pull out
the lock tab. Release the handle,
then close the door.