Honda FIT 2014 Owner's Manual page 102

12/04/18 14:41:32 42TF2C00_102
If you want to change any vehicle
control settings, select ''CHANGE
SETTINGS,'' and follow the
instructions on page 98
If you want the settings as they were
when the vehicle left the factory,
select ''DEFAULT ALL,'' as
described on page 118
Use the INFO button ( / ) on the
steering wheel to see and scroll
through the settings, and the SEL/
RESET button to enter your
selections.
.
.
▲ ▼
If you try to start driving while
customizing the settings, you will see
the above display for a few seconds
and customizing will be cancelled.
Customizing is also cancelled, if you
turn the ignition switch from the ON
(II) position to the ACCESSORY (I)
or LOCK (0) position, or move the
shift lever out of Park.
Multi-Information Display
To exit the customizing mode, select
the exit mode shown above by
pressing the INFO button repeatedly,
followed by the SEL/RESET button.
The display goes back to the normal
display.
Instruments and Controls
97