Honda FIT 2014 Owner's Manual page 311

12/04/18 15:08:54 42TF2C00_311
Changing a Flat Tyre
BRAKE HUB
Before mounting the spare tyre,
13.
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
306
Taking Care of the Unexpected
14. Put on the spare tyre. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
15. Lower the vehicle to the ground,
and remove the jack.
Tighten the wheel nuts securely in
16.
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
108 N·m (11 kgf·m)