12/04/18 14:42:14 42TF2C00_108
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the ''METER SETUP''
display.
Outside Temperature Display
Adjustment
If you find that the temperature
reading is always a few degrees
below or above the actual
temperature, adjust it as described in
the following section.
Multi-Information Display
While the multi-information display
is showing ''ADJUST OUTSIDE
TEMP. DISPLAY,'' press the SEL/
RESET button. The display changes
to the setting display.
CONTINUED
Instruments and Controls
103