Table of Contents
Advertisement
SYSTEM INSTALLATION MANUAL
KTR 2280A
•
Install the rear cover cap and solder to barrel lip in two places.
Figure 2-11 (Sheet 1 of 1) Connector Assembly
2.3.5.2
Taylor Backshell Instructions
A.
General Information
(1)
Taylor Backshells are a proprietary Honeywell design developed to expedite
cable harness fabrication while ensuring that HIRF and lightning performance
goals are met. A typical backshell is shown in Figure 2-12 Typical Taylor
Backshell. Figure 2-13 Backshell Assembly Exploded View provides an
exploded view of the backshell. Table 2-1 KTR 2280A Backshell Hardware
describes the connector type used for the KTR 2280A.
Page 2-10
15 May 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Hide quick links:
Advertisement
Table of Contents
