Figure - Honeywell KTR 2280A Installation Manual

SYSTEM INSTALLATION MANUAL
(6) Measure back 0.500 inch (12.70 mm) and remove the insulation from the center shield
as shown in Figure 2-6.
Figure 2-6 (Sheet 1 of 1) Quadraxial Cable Preparation
(7) Tin the shield for the center coax as shown in Figure 2-7.
Figure 2-7 (Sheet 1 of 1) Quadraxial Cable Preparation
(8) Measure back from the end of the cable 0.30 inch (7.6 mm) and score the center shield
with a cutting tool around the full circumference as shown in Figure 2-8.
Figure 2-8 (Sheet 1 of 1) Quadraxial Cable Preparation
© Honeywell International Inc. Do not copy without express permission of Honeywell.
KTR 2280A
Page 2-8
15 May 2017