Acronyms And Abbreviations; General - Honeywell KTR 2280A Installation Manual

• ASME Y14.38, Abbreviations for Use on Drawings and in Text (available from the
American National Standards Institute at http://www.ansi.org)
• ANSI/IEEE Std 91, Graphic Symbols for Logic Functions (available from the American
National Standards Institute at http://www.ansi.org)
• CAGE codes and manufacturers' addresses are available at https://cage.dla.mil
• IEEE 315/ANSI Y32.2, Graphic Symbols for Electrical and Electronics Diagrams
(available from the American National Standards Institute at http://www.ansi.org)
• MIL-HDBK-263, Electrostatic Discharge Control Handbook for Protection of Electrical
and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated
Explosive Devices) (Metric) (available from any military standards database)
• MIL-STD-1686, Electrostatic Discharge Control Program for Protection of Electrical and
Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive
Devices) (Metric) (available from any military standards database).
4.

Acronyms and Abbreviations

A.

General

(1) The abbreviations are used in agreement with ASME Y14.38.
(2) Acronyms and non-standard abbreviations used in this publication are as follows.
Term
ACARS
ADF
AM
ANSI
ANT
AOA
APM
ARINC
ASME
ATA
ATN
AVLC
BFO
BIT
CAGE
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM INSTALLATION MANUAL
KTR 2280A
List of Acronyms and Abbreviations
Full Term
aircraft communications addressing and reporting system
automatic direction finder
amplitude modulation
American National Standards Institute
antenna
angle of attack
aircraft personality module
Aeronautical Radio, Incorporated
American Society of Mechanical Engineers
Air Transport Association
aeronautical telecommunication network
aviation link control
beat frequency oscillator
built-in test
commercial and government entity
Page INTRO-3
15 May 2017