Hoyer
®
HPL700
3. Assembly and Commissioning Instructions
The Hoyer
®
HPL700 is heavy and will need to be lifted with care. You may need assistance
to lift the Hoyer HPL700 from the carton.
Carton Contents
Place the carton in a clear working area and open carefully. The carton contains:
Hoyer HPL700 Lift
Hand control
Charging cord
Covers and hardware (2)
Assembly Instructions
Remove all the parts from the carton and place on the floor, taking care to protect the finish from
damage.
1. Place the chassis in a clear space and apply the rear brakes (Figure 1).
2. Remove the 5/8" bolt that connects the mast (in its shipping position) to the base. Remove the
3/8" carriage bolt as well (Figure 2). Do not discard these nuts and bolts as they are needed for
assembly.
6
WARNING
Product documents
Battery pack (2)
Desk top charger/stand
6-point Bari loop spreader bar
Figure 1
Figure 2
English