Point Bari Loop Spreader Bar System - Joerns Healthcare Hoyer HPL700 User Instruction Manual

English

7. 6-Point Bari Loop Spreader Bar System

Follow these instructions exactly
®
Your Hoyer HPL700 lift uses 6-point Bari loop spreader bar. The removal of this system is
completed easily by the use of a quick-release pin. This is done quickly and easily, but you must
read the following safety instructions to ensure the spreader bar is safely locked into position
before use.
Do not attempt to disassemble kingpin from the 6-point Bari loop spreader bar. This applies
to spreader bar with or without scale.
Connection
To connect, place the spreader bar on a solid surface such as a table and lower the boom for ease
of attachment (Figure 8).
HPL700 (without scale):
Insert the pin sleeve through end of the boom and the kingpin of the spreader bar (Figure 9).
WARNING
Hoyer
HPL700
Figure 8
Figure 9
17
®