Philips NetCam DVR Installation Instructions Manual page 30

DVR_NC_ii_98911_0047.qxd
NetCam DVR
Lower 1: Displays the NetCam DVR recording start date/time.
Lower 2: Displays the number of image frames recorded.
Lower 3: Displays the NetCam DVR recording finish date/time.
Click on the forward/backward buttons to extend the replay period forward
I
or backward by 1,000 frames for each click. The frame number panel
(Upper 2) also changes by a unit of 1,000 frames.
Upper 1: Displays the NetCam DVR recording start date/time of the current
1,000 frames.
Upper 2: Displays the exact frame number of the current image.
Lower 3: Displays the NetCam DVR recording finish date/time of the current
1,000 frames.
Click on the forward/backward buttons to skip the replay period forward or
I
backward by 100 frames for each click. The frame number panel (Upper 2)
also changes by a unit of 100 frames.
Search:
You can select a date and
time or frame number to
start replaying.
Selecting images of events:
All: Select all images that are selected for
replay.
MD: Select the images that are recorded
when the NetCam DVR detected motion function operates.
S1 & S2: Select the images that are recorded when the respective sensor detector
activates. You can install 2 external sensors such as a thermal sensor and
infrared sensor, and connect it to the NetCam DVR DB-15 port.
30
12/13/00 1:53 PM Page 30
Section 3