Philips NetCam DVR Installation Instructions Manual page 24

DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 24
NetCam DVR Section 3
Event Save: You can
select the recording levels
of frame rate, image
resolution and image
quality (compressing
rate) when events occur.
Event: You can
configure which channel
sends video signals to
record on the HDD
when events occur. You
can activate the motion
detection function and two connected external sensors for any channel (see
'Motion Detect Channel' option for the respective channel that has the assigned
motion detection function). If you check channel 1 as a source channel in
relation to 'Motion Detect', the NetCam DVR records the video from channel 1
when the NetCam DVR detects motion through assigned motion detect
channel.
Config:
You can configure the NetCam DVR's system settings for the
HDD; Time, Password, and Screen adjustment.
24