Recorded Image Replay - Philips NetCam DVR Installation Instructions Manual

DVR_NC_ii_98911_0047.qxd
NetCam DVR
Click the 'Enable' button to focus on an existing defined area.
I
Click the 'Disable' to return to full view option.
I
Click the 'Attenuation' button to change the unfocused area's image quality.
I
Controlling pan/tilt/zoom
(Only available when the pan/tilt/zoom
option is enabled for the NetCam DVR.)
Zoom: To zoom in and out.
I
Accel: To set controlling speed of
I
pan/tilt/zoom.
Focus: To optimize the image focus.
I
Four arrows: To change direction by
I
panning and tilting the NetCam
DVR.
3.5

Recorded image replay

Selecting period of time or frame number to replay
Upper 1
Lower 1
Upper part: This part shows the current 1,000 frames being replayed.
Lower part: This part shows the total selected recorded data.
12/13/00 1:53 PM Page 29
Section 3
2 3
2 3
29