How To Supply Power To The Cv31 - Honeywell CV31A User Manual

Chapter 1 — About the Computer Features

How to Supply Power to the CV31

8
Status LEDs (Continued)
Callout LED
3 Battery Status
The accessories you use to supply power to the CV31 depend on
whether you want to replace a CV30 and keep your existing wiring or
perform a new installation:
To replace a CV30 and keep your existing wiring, you need to
•
purchase an adapter cable (P/N VE027-8024-C0).
• To perform a new installation, you need to know the electrical
rating of your CV31 and the vehicle you are installing it on to
determine which power supply to use.
Note: The AC power supply for the CV31 has a different input
connector than the AC power supply for the CV30. You cannot use the
CV31 power supply with a CV30.
Color Description
Blinking ITE is running but not connected to
blue the host. The computer is unhealthy.
Off ITE is not installed or not running.
The computer is healthy.
Steady The battery is outside the allowable
orange charging temperature range of 0 °C
to 40 °C (32 °F to 104 °F). Charging
will resume when the battery
temperature returns to within the
acceptable range.
Blinking There is a battery error. The battery
orange is not charging because it is missing,
faulty, or there is a bad connection.
Blinking The CV31 is not connected to
red external power, and the battery is
very low. The computer will go into
Suspend mode soon. Charge or
replace the battery.
CV31 Data Collection Computer User Manual