CHAPTER 3: INSTALLATION
2.
Right-click the Local Area Connection icon and select Properties.
3.
Select the Internet Protocol (TCP/IP) item from the list, and click the Properties button.
4.
Click the "Use the following IP address" box.
5.
Enter an IP address with the first three numbers the same as the IP address of the C70 relay and the last number
different (in this example, 1.1.1.2).
6.
Enter a subnet mask equal to the one set in the C70 (in this example, 255.0.0.0).
7.
Click the OK button to save the values.
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL
ADD DEVICE TO SOFTWARE
3-49
3