Self-Tests - Cisco Firepower 4110 Preparative Procedures & Operational User Manual

Cisco Preparative Procedures & Operational User Guide

4.6 Self-Tests

Cisco products perform a suite of FIPS 140-2 self-tests during power-up and re-boot. If any of the self-
test fails, the product will not enter operational state. If this occurs, please re-boot the appliance. If the
product still does not enter operational state, please contact Cisco Support (e-mail
call us at 1-800-917-4134 or 1-410-423-1901).
The following possible errors that can occur during this self-test are:

Known Answer Test (KAT) failures

Zeroization Test failure

Software integrity failure
© 2016 Cisco Systems, Inc. All rights reserved.
support@Cisco.com or