Cisco Firepower 4110 Preparative Procedures & Operational User Manual page 62

Cisco Preparative Procedures & Operational User Guide
1) Enter system mode:
Firepower-chassis# scope system
2) Enter system services mode:
Firepower-chassis /system # scope services
3) Configure the system clock:
Firepower-chassis /system/services # set clock month day year hour min sec
For month, use the first three digits of the month. Hours must be entered using the 24-hour format,
where 7 pm would be entered as 19.
System clock modifications take effect immediately. You do not need to commit the buffer.
Set the Date and Time Manually via GUI
1) Choose Platform Settings
2) Click the Time Synchronization
3) Under Set Time Source, click
4) Click the Date drop-down list to display a calendar and then set the date using the controls available
in the calendar.
5) Use the corresponding drop-down lists to specify the time as hours, minutes, and AM/PM.
6) Click Save.
© 2016 Cisco Systems, Inc. All rights reserved.
> NTP.
tab.
Set Time Manually.