Configure Tacacs+ Via Gui - Cisco Firepower 4110 Preparative Procedures & Operational User Manual

Cisco Preparative Procedures & Operational User Guide
Key field
Confirm Key field
Authorization Port
Timeout field
Retries field
c) Click OK to close the
4) Click Save.

4.4.8 Configure TACACS+ via GUI

1) Choose Platform Settings
2) Click the TACACS
3) For each TACACS provider that you want to add:
a) In the TACACS Providers
b) In the Add TACACS Provider
Name
Hostname/FDQN (or IP
Address) field
Order field
Key field
Confirm Key field
Port field
© 2016 Cisco Systems, Inc. All rights reserved.
in Firepower Chassis Manager or the FXOS CLI.
The SSL encryption key for the database.
The SSL encryption key repeated for confirmation purposes.
field The port through which Firepower Chassis Manager or the FXOS
CLI communicates with the RADIUS database. The valid range is 1
to 65535. The standard port number is 1700.
The length of time in seconds the system should spend trying to
contact the RADIUS database before it times out.
Enter an integer from 1 to 60 seconds, or enter 0 (zero) to use the
global timeout value specified on the
seconds.
The number of times to retry the connection before the request is
considered to have failed.
If desired, enter an integer between 0 and 5. If you do not specify a
value, Firepower Chassis Manager uses the value specified on the
RADIUS
Add RADIUS Provider
> AAA.
tab.
area, click Add.
dialog box, complete the following fields:
Description
The hostname or IP address on which the TACACS+ provider
resides.
The order in which the Firepower eXtensible Operating System
uses this provider to authenticate users.
Enter an integer between 1 and 16, or enter lowest-available or 0
(zero) if you want the Firepower eXtensible Operating System to
assign the next available order based on the other providers defined
in Firepower Chassis Manager or the FXOS CLI.
The SSL encryption key for the database.
The SSL encryption key repeated for confirmation purposes.
The port through which Firepower Chassis Manager or the FXOS
CLI communicates with the TACACS+ database.
Enter an integer between 1 and 65535. The default port is 49.
tab.
dialog box.
RADIUS tab. The default is 5