Security; Set A Pin Code Or Password To Restrict Access - Cisco DX80 User Manual

7

Security

Set a PIN Code or Password to Restrict Access

Tap Screen lock as outlined.
Using PIN as example, the system will prompt you to enter
a four digit PIN code.
In order to prevent an unintended lock-out of yourself, you
will now be prompted to confirm your PIN code. Enter the
PIN code, followed by tapping OK.
EFT Draft 1—Cisco Confidential—Do Not Distribute
Tap PIN or Password. Selecting None (if possible) will
create a vulnerable system and cannot be recommended.
Tap Continue when done.
Tap Home when done.
About PIN and Password
The system will normally prompt you
to enter a PIN code or password to
prevent unrestricted access to your
system.
The example shown here assumes
that you opt for a PIN code rather
than a password, but the procedure
is the same in both cases, apart
from the fact that a password
typically consists of a mixture of
alphanumerical characters.
D1510401 User Guide
Cisco Collaborate Desk DX80
Produced: April 2014, All contents © 2014
Cisco Systems, Inc. All rights reserved.